| Step 1 |
 |
Please open the upper cover of the camera and adjust the dip switch as below. Keep the switch at
|
| Step 2 |
 |
Set "ID" of dome camera, start from ID Number 2. |
| Step 3 |
 |
Please cut off the RJ-11 jack. |
| Step 4 |
After cutting off the RJ-11 jack, there are two separate lines. One is RED line, another one is GREEN line
|
| Step 5 |
 |
Please connect the RED line (T+) and GREEN line (T-) to RJ-485. RED line (T+) to RS-458+ (A) GREEN line (T-) to RS-485- (B). |
| Step 6 |
Please connect the Video Output of the camera to DVR and power them up. |
| Step 7 |
 |
Please do the Mini Dome Camera setting on the DVR Menu -> "Setting"-> "Pan/Tilt/Zoom". Select the channel of Mini Dome Camera
- Please select "Protocol" as "PELCOD1"
- Address" as "1"
- Please select "Baudrate" as "2400"
- Please select "Data Bits" as "8"
- Please select "Stop Bits" as "1"
- Please select "Verify" as "None"
- Press "Save" to save all settings then back to the main screen.
|
| Step 9 |
 |
Please select the channel of the Mini Dome Camera and press "□" to make it as a single channel view. |
| Step 10 |
Press "Fn" to control the Mini Dome Camera and insert the password of DVR to control the camera |
Mini Dome Camera (3050032~ 3050033) setting on DVR (304507xx)